Important crane safety tips

Without a doubt, cranes are incredibly powerful, and you can use them to lift very heavy loads in industrial settings. However, this also means that cranes can sometimes be dangerous. After all, the load that you are lifting with them can cause a lot of harm. If it falls, it can be lethal for people and for industrial equipment, leading to fires and other severe accidents. That is why the best crane rigging services put great emphasis on their safety of operation.

Many deaths related to cranes have been reported in the past. Most of these deaths are because of people getting struck by very heavy equipment. Often at times, it is due to the negligence of the operators and sometimes, due to the faulty cranes.

The most important crane safety tips

In this article, we will put together some important safety tips that all crane riggers should know about. These include the following:

Choosing the proper crane

The first step is to choose the right crane for the job. Safety comes from choosing the proper crane depending on the equipment. For instance, you can choose from all-terrain cranes, carry deck cranes, crawler cranes, and rough-terrain cranes.

Now you will not be able to efficiently use a crane designed for a smooth terrain on rough terrain. For that, a rough-terrain crane will be required. Of course, this is not all. There are many other cranes that you can choose from, each designed for a specific purpose.

Read the manuals

All types of cranes come with very comprehensive operator manuals. These manuals can usually only be understood and properly implemented by trained staff. A crane operator should have a deep understanding of the type of crane that he/she is operating. In the near future, artificial intelligence will significantly improve the safety of crane operations.

The operating manual of a crane consists of some very important information and specifications of the crane that the operator should remember. This includes the safety mechanisms of the crane, load capacity, counterweights and stabili9zers, and operator controls.

Perform routine maintenance

Again, maintenance is of great importance. Crane operators should do an inspection of the cranes regularly to make sure that the cranes are safe before they start operating them. Other than the maintenance daily check-ups are also required for safety.

The things that should be done before starting the crane include pre-start checkups, engine checkups, and checks of the safety systems in place.

Stabilize the crane prior to rigging

Before rigging, it is very important to stabilize the crane so that it does not trip over. Often at times, crane accidents are a result of improper weight balancing, which causes the crane to trip over. An outrigger is used to stabilize the crane before the rigging process.

This is especially true for mobile cranes which are usually moved from place to place. The outrigger is set up before the rigging begins and hence, it prevents unwanted accidents. So, make sure that the crane is properly stabilized.

Remember the load limits

All cranes have certain load limits. Any load beyond that could result in a fatal accident. So, it is important to make sure that the load limit is never exceeded. Modern cranes now contain load moment indicators that alarm the operators when the load limit is close.

Conclusion

Crane rigging requires trained operators. These operators are trained with the safety precautions and know about cranes inside out. Generally, it is much easier for construction companies to outsource their crane rigging needs to fully insured crane services VA. This removes the hassle of regular maintenance and check-ups, hence streamlining the entire process. Good crane companies always give first priority to security and safety on the construction site.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top